Process Biochem Selleck ICG-001 2007, 42:1454–1459.CrossRef Competing interests The authors declare that they have no competing interests. Authors’ contributions YL and XD designed the biodegradation experiments and carried out the characterization.

CW and XL participated in Fe3O4 nanoparticles and microbial cell/Fe3O4 biocomposite fabrication. XW and PX made substantial contributions to the conception and design of this paper. XW and YL wrote the paper. All authors read and approved the final manuscript.”
“Background Recently, various non-volatile random access memory (NvRAM) such as magnetic random access memory (MRAM), ferroelectric random access memory (FeRAM), phrase change memory (PCM), and resistive random access memory (RRAM) were widely investigated and discussed for applications in portable electronic products which consisted of low power consumption IC [1], non-volatile memory [2–6], and TFT LCD display [7–10]. To overcome the technical and physical limitation issues of conventional charge storage-based memories [11–18], the resistive

random access memory (RRAM) device which consisted of the oxide-based layer sandwiched by two electrodes was a great potential candidate for the next-generation non-volatile memory because of its superior properties such as low cost, simple structure, fast operation speed, low operation power, and non-destructive readout properties [19–42]. In our previous report, the resistive switching stability and reliability of RRAM device can be improved using a high/low permittivity bilayer structure [43]. Because the permittivity of porous SiO2 film is this website lower than that of SiO2 film, the zirconium metal doped into SiO2 (Zr:SiO2) thin film fabricated by co-sputtering technology and the porous SiO2 buffer layer prepared by inductively coupled plasma (ICP) treatment were executed to form Zr:SiO2/porous below SiO2 RRAM devices in this study. In addition, the resistive switching behaviors

of the Zr:SiO2 RRAM devices using the bilayer structure were improved and investigated by a space electric field concentrated effect. Methods To generate a space electric field concentrated effect in RRAM devices, the porous SiO2 buffer layer in the bilayer Zr:SiO2/porous SiO2 structure was proposed. The patterned TiN/Ti/SiO2/Si substrate was obtained by standard deposition and etching process; after which, 1 μm × 1 μm via holes were formed. After that, the C:SiO2 film was prepared by co-depositing with the pure SiO2 and carbon targets, and the porous SiO2 thin film (about 6 nm) was formed by ICP O2 plasma technology. Then, the Zr:SiO2 thin film (about 20 nm) was deposited on the porous SiO2 thin film by co-sputtering with the pure SiO2 and zirconium targets. The sputtering power was fixed with rf power 200 W and direct current (DC) power 10 W for silicon dioxide and zirconium targets, respectively.