The elemental composition of the Zr/CeO x /Pt was determined by energy dispersion. The results from the EDX analysis that showed the main component
present in this structure were O (38.41%), Zr (34. 05%), and Ce (3.83%). An oxygen peak at about 0.52 keV and Zr peaks at about 22.5 and 15.60 keV can be observed in the spectra. Figure 1 XRD pattern of the CeO x film and cross-sectional TEM selleckchem and EDX images of the Zr/CeO x /Pt device. (a) XRD pattern of the CeO x film deposited on Si wafer at room temperature. (b) Cross-sectional TEM image of the Zr/CeO x /Pt device. (c) EDX image of the Zr/CeO x /Pt device. The ZrO y layer is also observed from XPS signals at the interface of Zr and CeO2 layers. XPS analysis
was carried out to examine the surface chemical composition and the valence/oxidation states of Ce and Zr species involved in the device by inspecting the spectral line shape and signal intensities associated with the core-level electrons. Figure 2a shows the depth profile of chemical composition in the Zr/CeO x /Pt device. The interdiffusion of O, Ce, and Zr atoms are evident from the spectra. This is an indication of the formation of an interfacial ZrO y layer between the CeO x and Zr top electrode. The formation of the ZrO y layer is further confirmed from the shifting of Zr 3d peaks from a higher binding energy Selleckchem 4SC-202 position to lower ones (Figure 2c). The CeO x 3d spectrum shown in Figure 2b consists of two sets of spin-orbit multiplets. These multiplets are the characteristics of 3d3/2 and 3d5/2 (represented BCKDHA as u and v, respectively) [15]. The spin-orbit splitting is about 18.4 eV. The highest peaks at around 880.2 and 898.7 eV, recognized as v 0 and u 0 respectively, correspond to Ce3+ with the highest satellites as v′ (885.1 eV) and u′ (903.3 eV). Low-intensity peaks, i.e., v (882.5 eV) and u (900.9 eV) along with satellite features represented as v″ (889.4 eV), v‴ (897.5 eV), u″ (905.4 eV), and u‴ (914.6 eV), are observed, corresponding to the Ce4+ state. Figure 2 XPS binding energy profiles. (a)
Depth profiles of Zr, Ce, O, Pt, and W for the W/Zr/CeO x /Pt structure, (b) Ce 3d, (c) Zr 3d, and (d) O 1 s in the Zr/CeO x /Pt device. In CP673451 manufacturer reference to the differentiation between the Ce3+ and Ce4+ species with different line shapes, the XPS spectra correspond to various final states: Ce(III) = v 0 + v′ + u 0 + u′ and Ce(IV) = v + v″ + v‴ + u + u″ + u‴ [16]. The presence of the Ce4+ state is normally supported by the intensity of the u‴ peak, which is known as a fingerprint of Ce(IV) states [16]. This result implies that both Ce4+ and Ce3+ ions coexist in the bulk as well as in the surface of the CeO x film. Concentrations of Ce4+ and Ce3+, as obtained from the deconvoluted XPS spectra, are 39.6% and 60.4%, respectively.