In preparation) The mechanism of metal-assisted etching We need

In preparation). The mechanism of metal-assisted etching We need to explain the production of an etch track that is very close to the size of the

metal particle and the formation of porous Si remote from the particle. From the results of anodic etching [6, 24, 25], it is well known that there are three electrochemical pathways for Si etching: (1) current doubling (valence 2 process), which leads to the formation of Trichostatin A solubility dmso visibly photoluminescent nanoporous Si, (2) current quadrupling (valence 4 process), which leads to visibly photoluminescent nanoporous Si, and (3) electrochemical oxide formation (valence 4 process) followed by chemical removal of the oxide by HF(aq), which leads to electropolishing. Electropolishing occurs above a critical voltage/current density, which can be related to a nonlinearity introduced by water dissociation, which is a precursor to oxide formation [6]. When concentrations and voltages are appropriately adjusted, etching on the edge of the electropolishing regime can lead to current oscillations caused by competition between oxide formation and the various etching processes [26–28]. Our results indicate that stain

etching [4] as well as etching in the presence of Ag and Au [23] are dominated by the current doubling pathway. Etching in the presence of Pt is dominated by the current quadrupling pathway. In contrast, the initial lack of nanoporous Mirabegron Si in the presence of Pd indicates that etching is dominated by electropolishing, though MK-8776 nmr it is subsequently accompanied by current doubling etching. How does the metal nanoparticle catalyze electropolishing localized to

the nanoparticle/Si interface but also the formation of nanocrystalline por-Si remote from the nanoparticles? The proposed mechanism is illustrated in Figure 3. Rather than injecting holes directly into Si, the positive charge trapped on the metal nanoparticle or at its interface with Si creates an electric field, which turns the nanoparticle into a local anodic power supply. If the voltage is high (above approximately 2 V), anodic etching will enter the electropolishing regime [29]. This would explain the formation of an etch track roughly the size of the metal nanoparticle. Simply estimating the electrical potential V induced by a charge q at a distance r from the center the metal nanoparticle with V(r) = (4πϵ 0)- 1(q/r), it is found that injection of seven holes into a 5-nm radius nanoparticle will lead to a voltage that exceeds 2 V at the nanoparticle/Si interface. For n-type Si, avalanche breakdown induced etching in the dark is observed for a bias in excess of 10 V [29]. Injection of 35 holes would be sufficient to induce a 10-V bias at the nanoparticle/Si interface.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>