The reduction of the scale of local aggregation can reduce the magnitude of the thermal transport enhancement, providing a direct link

between the two. The choice of ZnO nanofluid for the investigation originates from the fact that unlike many metallic nanofluids, ZnO Selleckchem PF-2341066 nanofluids can be a stable VRT752271 supplier suspension over hours even without added stabilizers. This stability arises due to surface charges on as-prepared ZnO nanoparticles [14]. The stability over hours is long enough that it enables us to carry out the thermal measurements. The addition of polyvinylpyrrolidone (PVP) as a stabilizer enhances the stability even further to weeks and even months. Thus, the system chosen is a very suitable system where the measurements can be carried out in nanofluids with and without stabilizers and thus track the changes in thermal parameters in the addition of the stabilizer. In our earlier work on ZnO nanofluids [15], which is carried out using a dynamic 3ω technique, it has shown that the parameter effusivity (C p κ, C p

 = heat capacity, κ = thermal conductivity) has a prominent frequency dependence. MK5108 clinical trial The measured effusivity shows appreciable enhancement at low frequency, but above a characteristic frequency, the enhancement is significantly reduced and it approaches the parameters of the base liquid. In this paper, we investigate what happens to the enhancement of C p κ as well as its frequency dependence when a stabilizer is added to the system. We find that the presence of stabilizer, which reduces the local aggregation, actually

leads to a significant decrease of the C p κ. We also find that the frequency dependence Ribonucleotide reductase of C p κ in bare ZnO nanofluid gets quantitatively modified when the stabilizer is attached. In addition, we carry out an analysis of the frequency dependence of the temperature oscillation to separate out the contributions of C p and κ components and find that the enhancement in C p κ is primarily due to the enhancement of thermal conductivity κ. Methods Nanofluid synthesis Stable ZnO nanofluid, which is a dispersion of ZnO nanocrystals in ethanol, is prepared by wet chemical method [16]. The nanocrystals of ZnO were synthesized at low temperature (<90°C) in an alkaline medium using Zn acetate. The nanocrystals of ZnO are crystalline with an average size of approximately 10 nm as seen using the transmission electron microscope (TEM). The typical TEM image of a nanoparticle is shown in Figure 1a. Two nanofluids were prepared. One is a pure dispersion of the ZnO nanocrystals in ethanol, and the other is made by adding PVP as a stabilizer. PVP binds to the polar surface of ZnO. The ZnO nanofluid, even without PVP, can be stabilized in scales of hours. The addition of PVP leads to substantial enhancement of the stability of the nanofluid. PVP has been used in the past to make stable metal colloids of Pd [17], Au, and Ag [18].